HP ProCurve CLI

FLASH
show flash	Displays info about flash (version etc.)
copy running-config tftp filename.txt	Copy your running config to file filename.txt at tftp server which IP is .
copy tftp startup 192.168.0.2 hp_2524	Copy your config (filename hp2524) from server 192.168.0.2 via tftp to switch
copy tftp flash file.swi	Download and update your flash with file.swi from tftp server at

LOG
log	Display log events (most recent last)
log -r	Display log events (most recent first)
log A12	Display log events of port a12
log A12 -r	Display log events of port a12 (most recent first)
log 192.168.0.1	Display log events of 192.168.0.1

MAC
show mac A5	Show MAC-address of the device on port A5
show mac A4-A6	Show MAC-adresss of the devices on ports between A4 and A6
show mac 00112233-445566	Show which port device with MAC-address 00112233-445566 is connected
VLAN
show vlan	Show information about vlans on this swtich
show vlan ports A19	Show VLAN ID and status of specific ports (A19)
show vlan	Show ports on this vlan and port status

MISC
copy flash flash secondary	Copy software from primary to secondary image is not intuitive
copy flash flash primary	Updated secondary image first then You could copy from secondary to primary
hostname poro_1	Set switch hostname as poro_1
link-test 00112233-445566	Test connectivity between switches (this switch and 00112233-445566)
show run	Show running config
password operator	Set operator password (Normal user / read-only )
password manager	Set manager password (Admin user / read-write)
password all	Set operator and manager password
enable	Switch to manager lever from operator level
ping 192.168.0.1	Ping IP 192.168.0.1
chassislocate	Turn on/off switch locator led or blink it (30 minutes)
chassislocate blink 10	Blink switch locator led 10 minutes
ntp1 first.timeserver.net	Add first.timeserver.net to NTP server list
timesync ntp	Enable NTP syncronization with servers

PROMPT
Switch#	Manager prompt
Switch>_	Operator prompt
	Yönetici seviyesinde yapılabilecekler (Switch#): show: sistem bilgisini göster ping, link-test: test bağlantısı menu, setup: menü arayüzlerinden birine erişim clear :sistem istatistikleri sayaçlarını sıfırlar erase, write, copy: konfigurason dosyalarını sile yazma ve kopyalama işlemleri config: Global yapılandırma seviyesine geçebilir exit: Operator moduna döner Operator seviyesinde yapılabilecekler (Switch> ) : show:sistem bilgisini göster ping, link-test :test bağlantısı menu: menü arayüzlerinden birine erişim enable: Yönetici seviyesine yükletme işlemi